Schneider Electric - XMLA010A2S11 - Schneider Electric / Square D XMLA010A2S11 OsiSense Electromechanical Pressure Switch; Diaphragm, 45 bars (Destruction), 22.5 bars (Maximum Permissible Accidental)

ITEM #: 23175670
Size: 35 mm Width x 113 mm Depth x 75 mm Height
Schneider Electric / Square D OsiSense® OsiSense XM Electromechanical pressure switch of size 10 bar is used to measure pressure of hydraulic oils, fresh water, seawater, air and corrosive fluids. It has a fixed differential scale type for detection of one single threshold. Pressure switching point is adjustable from 0.6 - 10 bar on rising pressure and 0.1 - 9.5 bar on falling pressure. Switch gives a possible differential of 0.5 bar at low settings and 0.5 bar at high settings at a maximum permissible pressure of 12.5 bar per cycle. It has a current rating of 0.1 Amp at 250 Volts, 1.5 Amps at 240 Volts and 3 Amps at 120 Volts.
Switch is provided with a zinc alloy enclosure for high strength and durability. It has a diaphragm pressure actuator and a local display for convenience. Switch has snap-action auxiliary contacts and silver contacts for high conductivity. It withstands a maximum permissible accidental pressure of 22.5 bar and a destructive pressure of 45 bar. It has C/O contact type and G 1/4 female fluid connection type. Switch has screw-clamp terminals for electrical connection and an entry tapped, cable gland to accommodate cables of 9 - 13 mm.
Switch operates at a rate of 120 cycles/minute and provides mechanical durability of 500000 cycles. It measures 35 mm x 113 mm x 75 mm. It is included with a type gG, 10-Amps cartridge fuse for short circuit protection. Switch has four terminal block type. It operates at a temperature of -25 to 70 deg C and can be stored at a temperature of -40 to 70 deg C. Switch is IP66 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE/EN/IEC standards.
Schneider Electric, PRESSURE SWITCH XML +OPTIONS, -, -13ªF to +158ªF (-25ªC to 70ªC), 10 bar, 32ªF), Fixed 7.25 psi, G 1/4 (female) conforming to ISO 228, IP66 conforming to IEC/EN 60529, Nautilus, Type 13 (PG 13.5) Conduit Entrance - Screw Clamp Terminals, UL Listed File E164865 CCN NKPZ - CSA Certified File LR44087 Class 3211 03 - CE Marked, electromechanical pressure sensor, fresh water (0...70 ¦C)-air (0...70 ¦C)-hydraulic oil (0...70 ¦C)