Sharp Industries - SG618 - Sharp SG-618, Manual Surface Grinder, 1.5HP

  • MFR SKU: SG618
  • ITEM #: 2854203
  • 0 Reviews / 0 Questions
Currently Not In Stock
This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 2854203
Manual Surface Grinder SG-618, Box type inner-ribbed structure, Hardened and ground leadscrew, Auto lube system, Direct drive spindle
Features:
One V and one flat way for longitudinal travel; both ways are hand-scraped and covered with Turcite B coating.
Lead screws are hardened and ground for durabity.
Accurate slot grinding achieved using saddle locking system.
The motor shaft that drives the pley and the spindle is subject to a lot of lateral stress. A roller bearing...
ITEM #: 2854203
Manual Surface Grinder SG-618, Box type inner-ribbed structure, Hardened and ground leadscrew, Auto lube system, Direct drive spindle
Features:
One V and one flat way for longitudinal travel; both ways are hand-scraped and covered with Turcite B coating.
Lead screws are hardened and ground for durabity.
Accurate slot grinding achieved using saddle locking system.
The motor shaft that drives the pley and the spindle is subject to a lot of lateral stress. A roller bearing is installed for the lower support of the motor shaft. A unique SHARP feature.
Double-nut backlash eminator.
Cross sde and column screws are hardened and ground to a 70 Rockwell C hardness.
Hardened and ground box ways on column and saddle.
Smooth wire rope-driven table.
Main spindle run out within 0. 0001".
Automatic lubrication system.
This listing is for pack of 1.
Read More >>

Sharp Industries - SG618 - Sharp SG-618, Manual Surface Grinder, 1.5HP

  • Item #: 2854203
  • MFR SKU: SG618
  • Wheel Width (in)
  • 0.63
  • UNSPSC
  • 27112704
  • Wheel Diameter (in)
  • 8
  • Type
  • Manual Surface Grinder
  • Speed (RPM)
  • 3600
  • Horsepower
  • 1-1/ 2
  • Maximum Griding Width (in)
  • 6.3
  • Weight (lbs)
  • 1500
  • Maximum Griding Length (in)
  • 19.7
  • Table Size (in)
  • 6 x 18.3
  • Spindle Size (in)
  • 1.25
  • Longitudinal Travel (in)
  • 18.5
  • Cross Travel (in)
  • 7
  • Model
  • SG-618
  • Floor Space (in)
  • (W x H x L): 83 x 40 x 43

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items