Toll Free
1.866.636.2487
The Mini Dropin is a carbon steel machine bolt anchor for use in shallow embedment applications. In addition to solid concrete and precast hollow core plank, it can be used in post-tensioned concrete slabs and concrete pours over steel deck.
The Mini Dropin is a carbon steel machine bolt anchor for use in shallow embedment applications. In addition to solid concrete and precast hollow core plank, it can be used in post-tensioned concrete slabs and concrete pours over steel deck.
Drop-In Anchor, Carbon Steel, 1/4 in.-20 Thread, 3/8 in. Dia., 3/8 in. Drill Bit, 7/16 in. D Thread, 1.2 L x 3.6 H x 4.4 in. W
These expansion anchors can be driven into a drilled hole and expanded tightly to hold fasteners in place. They are suitable for use in concrete, block, masonry, and stone applications. This listing is for pkg. of 50.
ANCHOR WALL GRIP 1/8 IN D X SHORT 2100 POWERSFAST 100/BX This listing is for Box.
ANCHOR SIZE 1/8 INCH; DRILL SIZE 5/16 INCH; FINISH ZINC PLATED; HEAD TYPE SLOTTED PHILLIPS; MATERIAL CARBON STEEL; SCREW LENGTH 1-1/16 INCH; TPI 32; TYPE SLEEVE; POLLY[T] BRAND; APPLICATION CONCRETE BLOCK, HOLLOW TILE, PLASTER, WALLBOARD
Hex Nut Sleeve Anchor, Steel, 3/8 in Dia., 3 in L, 5/16-11 Thread Size, Zinc Plated This listing is for pkg. of 50.
Wedge Anchors • Zinc-plated carbon steel Use in Category 1 cracked and uncracked concrete. Include nut and washer. Meet or exceed IBC, IRC, and Florida Building Code. UL Listed; FM Approved. This listing is for pkg. of 50.
Power-Stud+ Wedge Expansion Anchor, SD1, 1/4" X 3-1/4" The Power-Stud+ SD1 Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included.
1/2" Internal Thread Carbon Steel Lipped Drop-In Expansion Anchor This listing is for pack of 50
DROP-IN ANCHOR, 1/2 WITH LIP SOLD IN 100/PACKS This listing is for Pack.
These expansion anchors can be driven into a drilled hole and expanded tightly to hold fasteners in place. They are suitable for use in concrete, block, masonry, and stone applications. This listing is for pkg. of 50.
DeWalt® Engineered Vertical Threaded Rod Hanger for wood installation is made from hardened steel to prevent snapping during installation or in high-stress environments; a Type 17 gimlet helps reduce wood splitting. The 1-piece design helps ensure a strong hold between the screw and the connector. • Requires no pre-drilling • Zinc-plated for corrosion resistance This listing is for pkg. of 25.
Hex Nut Sleeve Anchor, Steel, 1/4 in Dia., 1 3/8 in L, 10-24 Thread Size, Zinc Plated This listing is for pkg. of 100.
Permanent Polyester (B-423) is ideal for electronic PCB and component identification, bar code labels, rating plates and solar panel identification. Glossy white finish with permanent acrylic is thermal transfer printable. UL approved;CSA accepted. Meets requirements of a halogen-free material per DIN VDE 0472 part 815. Service temperature of -94 to 230° F (-70 to 110° C). A ribbon is required to print this material. Use Part Number M61-R6010 for the BMP61 Label Printer / BradyPrinter M611...
The Smart DI is an all-steel, machine bolt anchor available in carbon steel. It can be used in solid concrete, hard stone, and solid block base materials. The Smart DI is specifically designed to be easier to fully set during installation as a benefit to
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a fi nished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation to rque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ fi nish is available in bright zinc-plated...
DeWalt® Engineered Vertical Threaded Rod Hanger for wood installation is made from hardened steel to prevent snapping during installation or in high-stress environments; a Type 17 gimlet helps reduce wood splitting. The 1-piece design helps ensure a strong hold between the screw and the connector. • Requires no pre-drilling • Zinc-plated for corrosion resistance This listing is for pkg. of 25.
3/8" x 1-7/8" Zinc Plated Rod Hanger All Steel Lok-Bolt Sleeve Anchor This listing is for pack of 50
DeWalt® Engineered Vertical Threaded Rod Hanger for steel installation is made from hardened steel to prevent snapping during installation or in high-stress environments. The 1-piece design helps ensure a strong hold between the screw and the connector. • Requires no pre-drilling • Zinc-plated for corrosion resistance This listing is for pkg. of 25.
DeWalt® Engineered Vertical Threaded Rod Hanger for steel installation is made from hardened steel to prevent snapping during installation or in high-stress environments. The 1-piece design helps ensure a strong hold between the screw and the connector. • Requires no pre-drilling • Zinc-plated for corrosion resistance This listing is for pkg. of 25.
Wood-Knocker II+ and Pan-Knocker II+ concrete inserts are installed onto forms used to support newly poured concrete floor slabs, roof slabs or walls. The concrete inserts are specifically designed to provide hanger attachments for mechanical, electric al, plumbing (MEP) and fire protection. When the forms are stripped, the color-coded flange is visibly embedded in the concrete surface. The inserts allow the attachment of steel threaded rod or threaded bolts in sizes ranging from 1/4" to 3/4"...
Vertical Cast-in-Place Threaded Rod Anchor for Concrete, Wood, 3/8"-16 Screw Size, Zinc Plated, 100 This listing is for pkg. of 100.
Vertical Cast-in-Place Threaded Rod Anchor for Concrete, Wood, 1/2"-13 Screw Size, Zinc Plated, 100 This listing is for pkg. of 100.
Bang-It+ concrete inserts are designed for installation in and through composite steel deck (i.e. "pan-deck") used to support newly poured concrete floors or roof slabs. Bang-It+ concrete inserts are specifically designed to provide hangar attachments for mechanical, electrical, plumbing (MEP) and fire protection. After installation, the protective sleeve of the insert protrudes below the surface of the deck. The sleeves are color coded by size and allow overhead attachment of steel threaded...
Vertical Cast-in-Place Threaded Rod Anchor for Concrete, Wood, 3/4"-10 Screw Size, Zinc Plated, 100 This listing is for pkg. of 100.
Vertical Rod Threaded Anchor for Concrete, 3/4"-10 Screw Size, Zinc Plated, 50 PK This listing is for pkg. of 50.
Vertical Rod Threaded Anchor for Concrete, 5/8"-11 Screw Size, Zinc Plated, 50 PK This listing is for pkg. of 50.
1/4" Brown Bang-it Internal Thread Concrete Inserts For Metal Composite Decking This listing is for pack of 100
Bang-It Concrete Inserts, Range 1/4" - 7/8", Hole 3/8", Green Bang-It Concrete Inserts are designed for installation through pre-drilled metal composite deck (i.e. pan deck) used to support a newly poured concrete floor or roof slab. Depending upon the size/color chosen, the protective sleeve protrudes below the surface of the deck allowing overhead attachment of steel threaded rod in sizes ranging from 1/4" to 7/8" in diameter.
Wire Dispenser with 10 Spindles & an Adjustable Guide Loop. Length: 36-1/4". Width: 31-1/2". Height: 59". Capacity: (10) 2, 500" Spools up to 18" in Diameter, Weight: 196 lbs All welded steel construction Includes two (2) fixed andtwo (2) swivel locking heavy-duty casters The spool rack consists often (10) spindles and an adjustable guide loop, and can be turned 360° independent of the base Spindles are angled to contain reels and act as a brake while paying out wire...
#8 TRIPLEGRIP MULTI - PURPOSE ANCHOR GRE 100/PK This listing is for Pack of 100.