Toll Free
1.866.636.2487
Atlona Blank Face Plate for HDVS Series Wall Plate Switchers. The blank face plate, hides the Display On/Off and Input Select buttons on the switcher. This listing is for Each
The EZ-SX4 is a stereo audio source selector with an output volume control that adjusts the line-level output. This unit is ideal as a four input source selector feeding an associated audio amplifier. The user can conveniently select an audio source and adjust the level on the front panel. The EZ-SX4 is used in stores, houses of worship, restaurants, clubs, home component systems and commercial sound systems. Features Four Input Source Selection Unbalanced Stereo Audio Inputs and Output Inputs and...
The RU-VA2 is the optimum choice where connectorized, rack-mounted video attenuation is needed. This unit features two separate, passive isolated channels. A single input jack is provided for each attenuator. The output jack is intended to be connected to a 75 Ω terminated load. A front-panel knob is provided to adjust hot video levels down to the normal 1 volt p-p signal level. A single attenuator is capable of adjusting down the video level to half the incoming signal level. In situations...
RDL Microphone Compressor The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations (up to 30 dB) from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or Amplifier input. The only setup required is a front-panel level trimmer that is adjusted during normal speech until the compression LED just begins to flash. A rear-panel output level trimmer is provided although it is typically left in the normal...
The TX-AVX is part of the group of versatile TX series from Radio Design Labs. TX series feature the advanced circuitry and high-quality connectors for which RDL products are known. The ultra-compact TX series can be mounted in limited space using the adhesive methods popularized by RDL's STICK-ON Series. The TX-AVX may be mounted directly to a backboard using optional mounting brackets available from RDL.
The TX-VLA1 is the ideal choice in installations where video signals are being fed into long cables, or where a low video signal needs to be amplified. The unique power supply input allows the TX-VLA1 to be powered from a wide variety of existing ac or dc power sources. Security or surveillance cameras are frequently located significant distances from monitoring or recording equipment. Cable losses produce a decrease in the overall video level. High frequency attenuation in the cable produces additional...
RDL 2x4 VGA/XGA Switcher with EQ This listing is for Each
The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier. The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.
RDL 4x1 Stereo Audio Input Switcher with Headphone Amp The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone Amplifier and as a source selector feeding an associated audio Amplifier. The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems. This listing is for Each
The EZ-VMD2 is a high-resolution computer video distribution amplifier with two outputs. The input has an associated BIT ID switch to assure compatibility with various computers. Sync is front-panel switch-selectable between standard TTL or video. One of the two outputs is individually buffered for driving the computer monitor. The second output is driven by separate output amplifiers that provide flat, wideband response. All switched functions are easily accessible on the front panel.
Information >Information Name : COMPOSITE VIDEO & STEREO AUDIO Category : Ro Design Lab-z, Pro AV, Commercial Video, AV Signal Processing Accessories UPC Code : 813721010049 General Information Name: COMPOSITE VIDEO & STEREO AUDIO Category: Ro Design Lab-z, Pro AV, Commercial Video, AV Signal Processing Accessories UPC Code: 813721010049 Country of origin: United States. Country of origin is subject to change.
The EZ-VMD4 is a high-resolution computer video distribution amplifier with four outputs. The input has an associated BIT ID switch to assure compatibility with various computers. Sync is front-panel switch-selectable between standard TTL or video. One of the four outputs is individually buffered for driving the computer monitor. The other three outputs are driven by separate output amplifiers that provide flat, wideband response. All switched functions are easily accessible on the front panel.
The FP-VDA4 is the ideal choice in many applications where video signals need to be distributed. Video input and output connections are made on the top-panel BNC jacks. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules.The FP-VDA4 has two jacks in the bridging input stage. One jack is for the input signal; the other is a loop-through...
Provides 3DTV pass-through, lip Sync pass-through, FST Technology speeds up HDCP authentication process, EDID Management and Audio Mode selectors for rapid integration of source and display, field-upgradeable firmware using Mini-USB port and locking power supply. This listing is for Each
Atlona EDID emulator for 4K/UHD HDMI @60Hz with 4:4:4 chroma sampling plus HDR support. 5V and hot plug detect. Detects and resolves handshake issues. HDCP 2.2. The Atlona Etude Sync (AT-ETU-SYNC) provides EDID emulation and Hot Plug Detect communication between HDMI sink and source devices. Part of the comprehensive family of Atlona 4K HDR integration products, it detects and corrects for signal integrity issues associated with cabling or connections, and can resolve compatibility...
Atlona Rondo 1x2 HDMI distribution amplifier for HDR supports 4K/UHD video at 4:4:4/60 Hz as well as 18 Gbps HDMI. It is ideal for the latest sources and displays. Atlona Rondo 442 (AT-RON-442) is a 1×2 HDMI distribution amplifier for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The Rondo 442 is ideal for applications requiring the latest as well...
Atlona HDBaseT extender for 4K/UHD includes transmitter with control, is HDCP 2.2 compliant, and supports EDID communication. Power supply included. Atlona AT-UHD-EX-70C-TX is an HDBaseT transmitter for HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-70C-TX is HDCP 2.2 compliant and supports EDID communication. This HDBaseT transmitter...
The RU-VSX4 is the ideal choice in most applications where four video signals need to be switched to a single output. The RU-VSX4 has two rear panel-jacks for each of the four video bridging input stages. One jack is for the input signal; the other is a loop-through output of the source signal. If 75 Ω termination of the input signal is required, the terminator (provided) is plugged onto the LOOP OUT jack. The output video signal is 75 Ω back-terminated to provide unity gain into a...
Atlona Rondo 1x4 HDMI distribution amplifier for HDR supports 4K/UHD video at 4:4:4/60 Hz as well as 18 Gbps HDMI. It is ideal for the latest sources and displays. Atlona Rondo 444 (AT-RON-444) is a 1×4 HDMI distribution amplifier for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The Rondo 444 is ideal for applications requiring the latest as well as emerging 4K/UHD and HDR...
Atlona 4K/UHD HDR 230ft (70m) HDMI Over HDBaseT TX/RX Kit Atlona's TX/RX Kit is cost-effective and ideal for applications requiring the latest as well as emerging 4K/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in the HDMI 2.0a specification, plus the ability to pass metadata for HDR content. HDR and 4K/60 4:4:4 video content requires data rates exceeding 10 Gbps and up to 18 Gbps - a significant challenge for extending...
Atlona extender transmitter wall plate two-input wall plate switcher for HDMI and VGA with HDBaseT output includes Automatic Display Control via RS-232. Atlona AT-HDVS-150-TX-WP is a 2×1 switcher and HDBaseT transmitter with an HDMI input plus a VGA input with audio. The HDVS-150-TX-WP features a US 2-gang wall plate form factor. Video signals up to 1080p, plus embedded audio can be transmitted up to 230 feet (70 meters). The HDVS-150-TX-WP is designed for use with...
Atlona 3x1 switcher scaler three-input HD video scaler for HDMI and VGA signals, 2-HDMI, 1-VGA. Integrated scaling helps optimize image quality and switching performance. The Atlona AT-HD-SC-500 is a 3×1 switcher and HD scaler with two HDMI inputs and a VGA input with audio. It is designed to take video signals from switchers, PCs, or laptops, and scale them to an HDMI output at a wide range of resolutions and rates, up to 1080p @ 60 Hz and 1920×1200. The HD-SC-500 can serve as the central...
Atlona extender kit (transmitter/receiver) 4K/UHD @60Hz 4:4:4, HDR support. HDMI over HDBaseT w/ control (RS-232/IR/CEC) and PoE (TX powers RX) up to 230ft/70m. HDCP 2.2. Atlona HDR-EX-70C-KIT is ideal for applications requiring 4K/UHD and HDR sources and displays. It is compatible with all video resolutions, audio formats, and color space formats supported in HDMI 2.0b, plus the ability to pass metadata for HDR content. The HDR-EX-70C-KIT supports 4K HDR10 @ 60 Hz and Dolby Vision @ 30 Hz and is...
Atlona extender transmitter three-input switcher for HDMI and VGA with ethernet-enabled HDBaseT output includes automatic input selection via HPD and active video. Atlona AT-HDVS-200-TX-PSK is a 3×1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded audio, control, and Ethernet can be transmitted up to 330 feet (100 meters). The two-channel audio input can be assigned to any of the...
Atlona 4K HDR Transmitter and Receiver Set w/IR, RS232, Ethernet, and PoE The Atlona AT-HDR-EX-100CEA-KITis an HDBaseT transmitter/receiver kit for high dynamic range (HDR) formats. Part of the comprehensive family of Atlona 4K HDR integration products, the kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-EX-100CEA-KIT provides transmission of HDMI, plus Ethernet, RS-232, and IR control pass-through up to 330...
Atlona Dolby/DTS 4 HDMI Input to 2CH downconverter w/4K and HDR capabilities Atlona Dolby/DTS 4 HDMI Input to 2CH downconverter w/4K and HDR capabilities. This listing is for Each
691 is a high−performance HDBaseT 2.0 fiber transmitter for ultra−reach extension of 4K60Hz (4:2:0) HDMI, USB, Ethernet, RS−232, IR and stereo audio signals over either multi−mode or single−mode fiber optic. 691 converts all input signals to an HDBaseT 2.0 signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to the HDMI, USB, Ethernet, RS−232, IR and stereo audio signals. It extends video signals to up to 33km...
692 is a high−performance HDBaseT 2.0 fiber receiver for ultra−reach extension of 4K60Hz (4:2:0) HDMI, USB, Ethernet, RS−232, IR and stereo audio signals over either multi−mode or single−mode fiber optic. 692 converts the HDBaseT 2.0 fiber optics signal received from an extended line transmitter back into 4K60Hz (4:2:0) HDMI, USB 2.0, Ethernet, RS−232, IR and stereo audio output signals. It extends video signals to up to 33km (20.5 miles) over single−mode...
Atlona 4K HDR 4*4 HDMI Matrix Switcher The Atlona AT-HDR-H2H-44MA is a 4×4 HDMI matrix switcher for high dynamic range (HDR) formats. Part of the comprehensive family of Atlona 4K HDR integration products, it is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-H2H-44MA is ideal for residential applications with the latest as well as emerging 4K/UHD and HDR sources and displays. It includes EDID and HDCP management...
Atlona 4K/UHD dual-distance 4×4 HDMI to HDBaseT matrix switcher with PoE is control system friendly and is designed for multi-zone distribution applications. The AT-UHD-PRO3-44M is an HDMI to HDBaseT matrix switcher with PoE for 4K/UHD @ 60 Hz video signals with Power over Ethernet for receivers and analog audio breakout. The matrix provides both extended distance, 330 foot (100 meter) and long distance, 230 foot (70 meter) HDBaseT transmission over category...
Atlona 4K HDR 8*8 HDMI to HDMI Matrix Switcher The Atlona AT-HDR-H2H-88MA is an 8×8 HDMI matrix switcher for high dynamic range (HDR) formats. Part of the comprehensive family of Atlona 4K HDR integration products, it is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The HDR-H2H-88MA is ideal for residential applications with the latest as well as emerging 4K/UHD and HDR sources and displays. It includes EDID and HDCP...
Atlona 4K/UHD Dual-Distance 16 by 16 HDMI to HDBaseT Matrix Switcher with PoE. Provides 16 HDBaseT outputs with dual-distance transmission of A/V, control and power signals over a single category cable, 4K/UHD capability with HDCP 2.2 copy protection and audio de-embedding with volume, mute, and 5-band EQ . This listing is for Each