Image is an illustration, may not reflect the exact product sold.


Other products by White Rodgers / Emerson

White Rodgers / Emerson - 21D83M-843 - LENNOX DIRECT REPLACEMENT INTEGRATED FURNACE CONTROL SINGLE STAGE NITRIDE HOT SURFACE IGNITION. REPLACES LENNOX 83M00, WHITE-RODGERS 50A62-120, 50A62-121, 50A62-820, 50A66-843

  • MFR SKU: 21D83M-843
  • ITEM #: 6445463
  • 0 Reviews / 0 Questions
$235.47
Stock Status: SHIPS SOON (reserve your unit today)

ITEM #: 6445463
Product Overview

The 21D83M-843 from White Rodgers is a single-stage/HSI integrated furnace control replacement kit. It is an OEM replacement kit that simplifies installation and ensures peak system performance. The kit has 50A66-843 which is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyse and control the proper operation of the gas burner, inducer and fan. These controls incorporate system fault analysis for quick gas...
ITEM #: 6445463
Product Overview

The 21D83M-843 from White Rodgers is a single-stage/HSI integrated furnace control replacement kit. It is an OEM replacement kit that simplifies installation and ensures peak system performance. The kit has 50A66-843 which is an automatic gas interrupted ignition control that employs a microprocessor to continually monitor, analyse and control the proper operation of the gas burner, inducer and fan. These controls incorporate system fault analysis for quick gas flow shut-off, coupled with automatic ignition retry upon sensing a fault correction. Replaces Lennox models. It features diagnostic indicator flash codes, 3 fan speeds, remote flame sense, humidifier and electronic air cleaner connections (optional).
  • Input voltage of 25VAC, 50/60Hz
  • Maximum input current at 25VAC is 0.45A
  • Valve relay of 1.5A at 25VAC 50/60 Hz, 0.6pf
  • Ignitor relay of 2A at 120VAC, 50/60Hz (resistive)
  • Inducer relay of 2.2 FLA to 3.5 LRA at 120VAC
  • Circulator relay of 14.5 FLA to 25.0 LRA at 120VAC
  • Operating temperature range from -40°F to +175°F (-40°C to +79°C)
  • Humidity range from 5% to 93% relative humidity (non-condensing)
  • Natural, manufactured, mixed, liquefied petroleum and LP gas air mixtures are approved gases for use

Applications

Automation & Process Control
Contents

1 x 50A66-843 ignition control board, 1 x wiring harness (9pin to 12pin), 1 wiring harness (4pin to 6pin), 1 x mounting panel, 4 x stand-off fasteners, 1 x circuit breaker, 1 x 4" blue wire, 2 x wiring diagrams.
Read More >>

White Rodgers / Emerson - 21D83M-843 - LENNOX DIRECT REPLACEMENT INTEGRATED FURNACE CONTROL SINGLE STAGE NITRIDE HOT SURFACE IGNITION. REPLACES LENNOX 83M00, WHITE-RODGERS 50A62-120, 50A62-121, 50A62-820, 50A66-843

  • Item #: 6445463
  • MFR SKU: 21D83M-843
  • 1-STAGE, INTEGRATED, 3-FAN SPEED TYPE; FURNACE APPLICATION; -40 TO 175 DEG F TEMPERATURE RATING; CURRENT RATING 2 AMP AT 120 VOLT AC (IGNITER RELAY), 2.2 AMP FULL LOAD TO 3.5 AMP LOCKED ROTOR AT 120 VOLT AC (INDUCER RELAY), 14.5 AMP FULL LOAD TO 25 AMP LOCKED ROTOR AT 120 VOLT AC (CIRCULATOR RELAY); DELAY HEAT TIME 45 SECOND (ON), 60/90/120/180 SECOND (OFF); DELAY COOL TIME 2 SECOND (ON), 2/45 SECOND (OFF); AUTO RESET TIME 60 MINUTE; HUMIDITY RATING 5 TO 93 PERCENT RH (NON-CONDENSING); INCLUDES DIAGNOSTIC INDICATOR FLASH CODE; APPROVAL CSA (CANADA AND US); FLAME FAILURE RESPONSE TIME 2 SECOND; FLAME SENSE TYPE REMOTE; FUEL TYPE NATURAL, MANUFACTURED, MIXED, LIQUEFIED PETROLEUM AND LIQUID PROPANE GAS AIR MIXTURE; IGNITION SEQUENCE 4; IGNITION SOURCE HOT SURFACE IGNITER; IGNITION TRIAL TIME 4 SECOND; POWER RATING 25 VOLT AC 50/60 HERTZ, 0.45 AMP; PREPURGE TIME 15 SECOND; VALVE RATING 1.5 AMP AT 25 VOLT AC 50/60 HERTZ

There are no questions about this product yet. Be the first to ask a question.

0 out of 5 stars
5 Star
0 %
4 Star
0 %
3 Star
0 %
2 Star
0 %
1 Star
0 %

Review this product

Tell us about your personal experience

Recently Viewed Items