Image is an illustration, may not reflect the exact product sold.

Yamato Scientific - GL840M - DATA LOGGER WITH 7" COLOR DISPLAY, 20 ANALOG CHANNELS

MFR SKU: GL840M

ITEM #: 22440163

- 0 out of 5 stars
- 5 Star
  0 %
- 4 Star
  0 %
- 3 Star
  0 %
- 2 Star
  0 %
- 1 Star
  0 %
0 Reviews / 0 Questions

Currently Not In Stock

This product appears to have been discontinued, however, other similar products may be available. Our product specialists would be happy to research this for you and provide recommendations. Email me suggestions!

ITEM #: 22440163
Isolated/Universal input, standalone multi-channel data logger ideal for voltage/temperature measurement on multiple channels. Features

Flexible input system for wide array of applications
Wireless LAN capability for remote monitoring and remote data logging system
Extended memory capacity using SD memory card
Maximum sampling interval of up to 10ms
Large easy-to-read 7-inch wide color LCD for GL840M and 4.3-inch for GL240

Yamato Scientific - GL840M - DATA LOGGER WITH 7" COLOR DISPLAY, 20 ANALOG CHANNELS

Item #: 22440163

MFR SKU: GL840M

Technical Specs

Number of analog input channels 10 channels 20 channels in standard configuration, Expandable up to 200 channels
Number of analog input terminals --- Up to 10 terminals (20 channels / terminal), standard config:1
Type of analog input terminal --- Multi-input type, Withstand-voltage type
Port for digital sensor --- 1 port for the sensor/input terminal/adapter of GL100
External input/
output *¹ Input *² Trigger or Sampling (1 channel), Logic/Pulse (4 channels)
Output *³ Alarm (4 channels
Sampling interval 10 ms to 1 hour (10ms to 50ms: voltage only) *, External signal
Time scale of waveform display 1 sec. to 24 hour /division
Trigger,
Alarm function Trigger action Start or stop capturing data by the trigger
Repeat action Off, On (auto rearmed)
Trigger source Start: Off, Measured signal, Alarm, External, Clock, Week or Time
Stop: Off, Measured signal, Alarm, External, Clock, Week or Time
Condition Setting Combination: AND / OR
Analog signal: Rising (High), Falling (Low), Window-in, Window-out
Logic signal: Pattern (combination of each input signal in high or low)
Pulse (number of count): Rising (High), Falling (Low), Window-in, Window-out
Alarm output Outputs a signal when alarm condition occurs in the input signal *
Pulse input
function Rotation count
(RPM) mode Counts the number of pulses per sampling interval and converts to rpm
(rotations per minute), Number of pulses for one rotation can be set to
50, 500, 5000, 50k, 500k, 5M, 50M, 500M rpm/F.S. (rpm./Full Scale)
Accumulating
count mode Accumulates the number of pulses from the start of measurement
50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
Instant count
mode Counts the number of pulses per sampling interval
50, 500, 5000, 50k, 500k, 5M, 50M, 500M C/F.S. (Counts/Full Scale)
Calculation
function Between channels Addition, Subtraction, Multiplication, and Division for analog input
Statistical Select two calculations from Average, Peak, Maximum, Minimum, RMS
Search function Search for analog signal levels, values of logic or pulse or alarm point in captured data

Interface to PC USB (Hi-speed), WLAN (using B-568 option) Ethernet (10 BASE-T/100 BASE-TX), USB (Hi-speed), WLAN (using B-568 option)
Storage
device Internal Built-in 4GB Flash Memory *
External One SD card slot (Supports SDHC memory card, up to 32GB) *
Saved contents Captured data, Setting conditions, Screen copy
Capturing mode Mode: Normal, Ring, Relay
Ring: Saves most recent data (Number of capturing data: 1000 to 2000000 points *
Relay: Saves data to multiple files without losing data until data capturing is stopped
Replay data Replays captured data that was saved in the GL240 (in BGD or CSV format) Replays captured data that was saved in the GL840 (in GBD or CSV format)
Scaling (Engineering unit) function Measured value can be converted to specified engineering unit
• Analog voltage: Converts using four reference points (gain, offset)
• Temperature: Converts using two reference points (offset)
• Pulse count: Converts using two reference points (gain)
Action during data capture • Displaying past data (using dual display mode (Current + Past data))
• Hot-swapping the SD memory card
• Saving data in between cursors
Display (LCD) Size 4.3-inch TFT color LCD (WQVGA: 480 x 272 dots) 7-inch TFT color LCD (WVGA: 800 x 480 dots)
Language English, French, German, Chinese, Korean, Russian, Spanish, Japanese
Information* Waveform in Y-T with digital values, Waveform only, Digital value, Digital values and statistics values, Bar chart
Operating environment 0 to 45 º C, 5 to 85 % RH (non condensed)
(When operating with battery pack 0 to 40 º C, charging battery 15 to 35 º C)
Power source AC adapter 100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory)
DC power 8.5 to 24 V DC (DC drive cable (option B-514) is required
Battery pack Mountable two battery packs (battery pack (option B-569): 7.2V DC, 2900mAh)
Power consumption *¹ Max. 38 VA Max. 36 VA
External dimensions WxDxH *¹¹ ~188 x 117 x 42 mm ~ 240 x 158 x 52.5 mm
Weight *¹² ~ 500g ~ 1010g

Questions & Answers

Add Question

0 Customer Ratings & Reviews

Review this product

Tell us about your personal experience

Write a review

5 Star		0 %
4 Star		0 %
3 Star		0 %
2 Star		0 %
1 Star		0 %

Yamato Scientific - GL840M - DATA LOGGER WITH 7" COLOR DISPLAY, 20 ANALOG CHANNELS

Yamato Scientific - GL840M - DATA LOGGER WITH 7&quot; COLOR DISPLAY, 20 ANALOG CHANNELS

Technical Specs

Questions & Answers

0 Customer Ratings & Reviews

Review this product

Recently Viewed Items

Yamato Scientific - GL840M - DATA LOGGER WITH 7" COLOR DISPLAY, 20 ANALOG CHANNELS